Twin Blade Heat Powered Stove Fan

A stove fan is designed to equally distribute warm air across the room created by a gas or wood burning stove. It has a peltier module that acts as a generator to power the stove fan's discreet motor. Our stove fans only use heat from the stove so is completely self-powered. By using a stove fan this will result in lower fuel costs and reduced emissions. The stove fan will begin to operate when the surface temperature reaches 50°C. Because of the low starting temperature, our stove fan can be used on gas stoves as well as wood burning stoves. Using a stove fan is the most economical way to effectively circulate warm air. It uses no batteries so can be used where there is no electricity.

There is a safety strip on the base of the fan which is designed to gently lift the base of the fan to prevent it from overheating and damaging the motor. The safety strip will then lower the fan back when the stove decreases to the maximum operating temperature.

Note: Must be placed on top of the stove away from the flue pipe at a minimum distance of 4".

Like this fan? Why not check out our single short powerful 4 blade stove fan, The 524 is a single rounded design? Click Here

• 1970 RPM Max (Average 1655 RPM)
• Height 138mm, Width 205mm
• Optimum burn (300°C) ft/min (CFM) 380
• Increase the efficiency of your stove by up to 33%
• Circulates warm air over large areas
• • Fully heat powered
• 50°C low starting temperature
• Fan speed automatically varies with temperature
• Very quiet operation
• Constructed with anodised aluminium